Ionmax Serene user manual

v1.0. Updated June 2015.

Please read the user manual to ensure safe and proper usage.

Please read the instructions carefully before using and be sure to keep the user manual where it is easily accessible for future reference.

Ionmax Serene user manual

Table of contents

📖 View and download the Ionmax Serene aroma diffuser user manual [PDF] here

Thank you for purchasing the Ionmax Serene ION138 Ultrasonic Aroma Diffuser. The Ionmax Serene reintroduces moisture into the air to help you maintain a comfortable humidity level in your home. 

Please read this manual carefully to ensure proper usage and save these instructions for future reference.

The package includes:
• ION138 Ultrasonic Serene Aroma Diffuser
• Measuring Cup
• Power Adapter
• User Manual

Control Panel & Settings

“ON / OFF” BUTTON

Touch this button to switch the unit on and off. The aroma diffuser will only function if there is water in the unit. To enable other functions, see below.

“ALARM” BUTTON

The unit can be set to an alarm. When the alarm goes off, the unit will turn on the aroma diffuser, LED lights in auto colour changing mode, and emit an alarm sound. After 60 seconds, the alarm sound will stop but the unit and the LED lights will remain switched on.

While the alarm is beeping, touch the Alarm Button or the On/Off Button to silence the alarm. Touch the On/Off Button again to switch all functions off.

If no water is in the unit when the alarm is triggered, the unit will enter Standby mode after 60 seconds.

To set the alarm, hold the Alarm Button to enter Settings mode. The LED time display will start to flicker. Touch the Light Button to set the Minutes and the Alarm Button to set the Hours. Then, press and hold the Alarm Button to confirm and complete the alarm settings.

To activate or deactivate the alarm, after an alarm time has been set, touch the Alarm Button to activate the alarm. The Alarm Button will light up. Touch the Alarm Button again to deactivate the alarm; the light will turn off. 

“LIGHT” BUTTON

Touch this button to turn the light mode on or off. Continue touching to select the desired light mode between auto changing, red, green, blue and off.

“TIMER” BUTTON

The unit can be timed to operate for intervals of 30 minutes, 60 minutes, 120 minutes and 180 minutes, stopping automatically when the selected operating time has elapsed. For continuous operation, touch the Timer Button repeatedly until the LED time display screen shows “0000”.

LED TIME DISPLAY

Press and hold the Timer Button to enter Settings mode. The LED time display will start to flicker.
Touch the Light Button to set the Minutes and touch the Timer Button to set the Hours. After you have set the desired time, press and hold the Timer Button to confirm and complete the time settings. 

Operating Instructions

FOR FIRST TIME USE: Please remove the battery film from the back of the unit before use.

  1. Remove the cover.
  2. Use the measuring cup to add water to the water tank. Do not fill beyond the MAX level mark of the unit. The aroma diffuser will not work if filled beyond the MAX level mark.
    Do not attempt to pour water into the aroma diffuser with the cover in place. 
  3. Add 3-5 drops of essential oil to the water.
    Do not exceed the suggested amount and always follow the essential oil manufacturer's instructions for safe use.
  4. Replace the cover.
  5. Connect the aroma diffuser to a power outlet using the included power cable, and switch on the unit.

Cleaning and Maintenance

Please follow all maintenance instructions carefully. These steps are essential to prevent microorganisms growing in the water within the aroma diffuser.

A) After each use

  1. Turn the unit off and unplug the unit from the electrical outlet. Then lift off the top cover.
  2. Drain and rinse the water tank thoroughly after each use to remove any sediment and dirt. Wipe clean and dry with a clean soft cloth or paper towel.

B) Daily maintenance

  1. Before cleaning, turn the power off and unplug the unit from its electrical outlet.
  2. Remove the water tank from the base of the unit.
  3. Carry the water tank to a sink, then drain and rinse the water tank thoroughly to remove any sediment or dirt. Wipe clean and dry it with a clean soft cloth or paper towel.
  4. Refill the water with cool tap water as instructed in the Operating Instructions.

C) Weekly maintenance

  1. Repeat steps 1-3 above (under B. Daily maintenance).
  2. Pour one cup of white vinegar (about 50 -100ml) into the base in the main body and leave for about 15 minutes. Then, wipe off the scale (especially in the transducer) with a soft brush or cotton swab.
  3. Wipe off the scale and white vinegar solution using a clean soft cloth.

D) Maintenance caution

  1. Never submerge the main body in water.
  2. Do not use any solvents or aggressive cleaning agents to clean the unit.
  3. Clean the internal parts with a soft cloth.
  4. Use only a soft brush, cloth or cotton swab to clean the transducer. This should be done once a week.
  5. Change the water in the water tank at least once a week to ensure that water is not left standing for more than one week.

E) Storing the aroma diffuser

  1. Clean the unit as described above and dry thoroughly.
  2. Preferably, store the unit in its original box.
  3. Avoid exposing the unit to high temperatures