📖 View and download the Ionmax ION90 humidifier user manual [PDF] here
Thank you for purchasing the Ionmax ION90 Hybrid UV Humidifier. The ION90 reintroduces moisture into the air to help you maintain a comfortable humidity level in your home. Utilising a combination of UV LED and Bio-photocatalyst technology, the ION90 sterilises and deodorises the air before allowing it to emit clean, pure mist.
Features
Auto Mode
When set to Auto Mode the Ionmax ION90 Humidifier will, automatically adjust the level of mist volume to accomodate the surrounding humidity level till it
reaches the DESIRED relative humidity.
The desired humidity level is between 50% and 65% RH.
UV Bio-Photocatalyst Sterilisation and Deodorisation
Relying on the fan outlet to deliver mist, the Ionmax ION90 Humidifier uses a combination of UV LED and Bio-Photocatalyst to constantly sterilise and deodorise the air before allowing it to blow out clean, pure mist.
The combination of bio material and photocatalyst acts as an environmental friendly oxidising agent when activated by ultraviolet ray. When the photocatalyst captures ultraviolet light, it forms activated oxygen from
water or oxygen in the air. The formed activated oxygen effectively decomposes smelly particles to achieve maximum deodorisation and sterilisation effects.
Dual Mist Outlet
For a more comprehensive coverage of the surroundings, the Ionmax ION90 Humidifier has two mist outlets which can be rotated accordingly to your surrounding for optimal efficiency.
Duo-Humidification Methods
The Ionmax ION90 Humidifier has the capability to use two types of humidification methods. Heat Vapourising (Warm Mist) and Ultrasonic Humidification (Cool Mist). Both methods utilise ultrasonic vibrations.
It is recommended to use the Warm Mist option if you want humidification to take place faster. The mist that is emitted via the Warm Mist option is around 35°C whilst the Cool Mist option is room temperature.
Humidity Level Control
IONMAX Humidifier ION90 allows you total control in presetting and choose from a humidity level of 40% to 75% RH (at an increment of 5%) or even in Continuous mode.
Humidification Timer
IONMAX Humidifier ION90 can be programmed to work from 1 to 9 hours or run continuously. The time advances by 1 hour each time the timer button is pressed.
Hydrostat for Pre-Set Humidity Level
The Ionmax ION90 Humidifier comes with an in-built hydrostat that works as an automatic sensor of the surrounding relative humidity and hence facilitates it to continuously moderate and sustain your desired relative humidity.
When the pre-set or programmed relative humidity is reached, the humidification process will pause automatically. Alternatively, the humidification process will resume again if the relative humidity drops below the pre-set level.
Programmed Humidity Settings
Common Cold
In this mode, the Ionmax ION90 Humidifier will maintain the relative humidity from 56% to 70% RH. It helps to keep the relative humidity high for better breathing as well as to alleviate cold symptoms.
Atopy
The Ionmax ION90 Humidifier is also able to help people with Atopy* by maintaining the relative humidity from 50% to 62% (at an increment of 2%). This range of relative humidity is also suitable and comfortable for babies.
**An allergy that makes a person susceptible to certain allergic responses such as hay fever and asthma.
Regulated Mist Volume
Regulate the mist volume of your Ionmax ION90 Humidifier by choosing between levels of “Low” , “Medium” or “High” .
Sleep Mode
When set to SLEEP, the Ionmax ION90 Humidifier LCD becomes dimmer with the relative humidity set at 60%. It will operate continuously for 8 hours with WARM mist before powering off automatically.
Water Shortage Indicator
The Ionmax ION90 Humidifier comes with an inbuilt water shortage sensor that will inform you when the water level is low. The unit will beep 5 times and the "No Water" notification will blink continuously to alert you of the status. This is useful in reminding the user to refill the Water Tank.
Demineralisation Filter
When water goes through the Demineralisation Filter, it is restructured at an ionic level and the dissolved mineral salts and other additives are removed, thereby softening the water. This aids in reducing mineral buildup at the nebuliser and producing finer ultrasonic humidification.
Using the Ionmax Humidifier
Ensure that the power cord is removed from the power supply at all times during installation, refilling of water, maintenance and transportation.
- Remove the unit from all packaging. Check and ensure that there are no foreign objects inside the Water Tank and Water Reservoir.
- Remove the Water Tank from the base and fill it with clean, tepid or cool water from the tap. NOTE: DO NOT use water above 40°C.
- Empty water from base.
- Fasten the cap of the Water Tank snugly and place it back onto the Humidifier Base. Please note that whenever a filled Water Tank is placed onto the Humidifier Base, the sound of gurgling water is normal. This happens when water is travelling from the Water Tank into the Water Reservoir. Wait for a while for the water to fill up the Water Reservoir.
- Select a stable surface to situate the unit. Plug the power cord into the power supply and switch on. A beep signal will be heard. Press the “POWER” button and the unit will commence operation in mode. Read more on the “FEATURES” section to understand the various functions of the Ionmax ION90 Humidifier. To power off, press the “POWER” button again.
- The programmed relative humidity is met.
- There is a shortage of water supply.
- There is a disruption of power supply.
Cleaning and Maintenance
RECOMMENDED MAINTENANCE
It is recommended to clean and maintain the Ionmax ION90 Humidifier at least once a week.
BEFORE YOU START:
- DO NOT use any detergents, solvents or aggressive agents to clean the unit.
- DO NOT use brushes or cloths that are abrasive or might cause scratches or damage to the unit.
- DO NOT allow water to sit in the tank for more than 1 week.
TO CLEAN THE BODY CASING
The Ionmax ION90 Humidifier should always be regularly maintained and cleaned. For external maintenance, regularly use a damp cloth to wipe the surface to prevent the accumulation of dust.
TO CLEAN THE WATER TANK
Remove sediments or scale buildup by shaking the Water Tank vigorously after refilling the Water Tank. Pour out the water and wipe the internal tank thoroughly with a soft cloth.
TO CLEAN THE WATER RESERVOIR
Pour water away from the Water Reservoir as shown in the picture.
DO NOT let water get into the Fan Outlet. Remove sediments or scale buildup inside the Water Reservoir by using a damp cloth to wipe the surface.
IMPORTANT
- When the Nebuliser is not regularly cleaned, the efficiency of the unit will be compromised or even damaged depending on the severity.
- DO NOT clean the Nebuliser with any solvents or aggressive agents.
- DO NOT scratch or rub the surface of the Nebuliser with a sharp article.
To keep or store the Ionmax ION90 Humidifier, ensure that water is thoroughly drained, removed and dried from the Water Tank and Water Reservoir before storing in a cool and dry place.